9 Best Bed Riser Blocks (November 2026)
The best bed riser blocks include the ANNKUT Furniture Risers 4 inch for adjustable block height, the MYMULIKE Bed Risers 3 Inch for oversized bed legs, and the ANNKUT Bed Risers 6 Inch Heavy Duty for a fixed 6 in lift.
On this page (7 sections)
- Which bed riser blocks suit different beds?
- How should you compare bed riser blocks?
- What height do you need for storage clearance?
- Are stackable bed riser blocks a good choice?
- Which bed riser blocks work with different bed frames?
- How can you keep raised bed risers stable?
- Which bed riser blocks should you choose?
The best bed riser blocks for most beds are ANNKUT Furniture Risers 4 inch, because the stackable layers allow three height choices and the base has TPU rubber. MYMULIKE is a better fit for oversized feet, while Sopicoz offers stackable wood blocks.
Bed riser blocks can add storage clearance or make a bed sit higher, but the right choice depends on foot shape, floor contact and the lift you need. For the broader support decision, read bed frame vs mattress foundation.
Measure all support points first, including center legs if your frame has them.
Our picks focus on the details that affect fit: block height, leg opening, stacking design and the stated base features. For an overview of bed support options, browse our mattress supports guide.
Our picks at a glance
-
1
-
2
-
3
- 4
Check itANNKUT Furniture Risers 3 inch
Best for a lower adjustable lift - 5
Check itHiceeden 4 Pack Heavy Duty Bed Risers
Best for wide square furniture feet - 6
Check itDEDU Oversized Bed Risers Heavy Duty Stackable
Best for stacking to 6 in - 7
Check itNoamus 6 Pack Round Bed Risers
Best for six-point support - 8
Best for a wood finishCheck it - 9
Best for a simple 4 in liftCheck it
Which bed riser blocks suit different beds?
ANNKUT's adjustable rectangular blocks are the best all-around option here, while the other picks suit wider legs, a fixed lift or a wood look. Match the block to the exact shape of your bed feet before comparing extra height.
ANNKUT Furniture Risers 4 inch: Best for adjustable block height
- Stackable 1.5, 2.9 or 4.2 in height
- Fits legs up to 4.5 x 2.4 in
- TPU rubber at the base
- Stated 1,300 lb total capacity
Stackable layers let you choose among three heights, while the rectangular opening has full and half sides for different leg sizes. Measure each bed leg before choosing this shape.
Pros
- Three height options
- TPU rubber base
- Full or half side for leg fit
Cons
- Leg fit is limited to 4.5 x 2.4 in
- Height options require stacking layers
ANNKUT's 4 in risers use layers to provide 1.5, 2.9 or 4.2 in of lift. That range gives you a lower setting for a small clearance change and a taller setup for larger bins.
The rectangular design has full and half sides, which helps accommodate different foot sizes. ANNKUT says the blocks fit furniture legs up to 4.5 x 2.4 in, so measure the feet before choosing them.
The top surface is rough and convex, and the base uses TPU rubber. The stated total capacity is 1,300 lb, but a capacity figure does not replace checking your frame's load limits or ensuring every foot sits correctly.
Pick these if you want more than one height and your bed feet fit the rectangular opening. If your legs are wider or round, compare their shape with the oversized MYMULIKE blocks before deciding.
MYMULIKE Bed Risers 3 Inch: Best for oversized bed legs
- 5.5 x 5.5 in top opening
- Stackable design
- 3 in starting height
- ABS construction
The wide top opening suits larger furniture legs, and the stackable design offers more height. Check the shape of your bed feet and the chosen stacking height first.
Pros
- Wide 5.5 x 5.5 in opening
- Stackable design
- Described for caster wheel furniture
Cons
- Wide blocks need floor space
- Confirm the fit for your specific bed feet
MYMULIKE is the strongest match for beds with large, broad feet. Its top opening measures 5.5 x 5.5 in, giving it a wider target than the smaller rectangular blocks.
The 3 in blocks are stackable, and the design is described for desks, chairs, sofas, beds and caster wheel furniture. Make sure your bed's feet sit centered and fully supported before raising the frame.
The wide base takes up more floor space around each leg. That can matter in a tight room or when the frame has feet close to a wall.
Choose these if standard risers are too narrow for the bed's feet. For a frame with broad side rails or a central platform base, see our best platform bed risers guide to compare other fit considerations.
ANNKUT Bed Risers 6 Inch Heavy Duty: Best for a fixed 6 in lift
- 6 in lift
- Fits legs smaller than 6.7 x 4.3 in
- TPU rubber at base
- Triangular non-slip cones
This fixed-height option has an L-shaped profile and a broad fit range for furniture legs. Measure the legs and make sure a 6 in lift is suitable for the bed.
Pros
- Fixed 6 in height
- TPU rubber at the base
- Top cones are described as non-slip
Cons
- No lower height option
- Large blocks may be conspicuous
ANNKUT's 6 in risers suit beds that need a fixed, taller lift for storage clearance. Their L-shaped sides are sized for furniture legs smaller than 6.7 x 4.3 in.
The top has triangular non-slip cones, and TPU rubber sits along the bottom edge. The trapezoidal shape widens toward the floor, which gives the blocks a broader base than a straight-sided design.
A 6 in rise changes the bed's sitting and entry height, so check how high the mattress surface will be before using them. The brand states a 6,000 lb capacity, but fit and level contact still matter for stability.
Choose this model when you want a taller rise and the bed feet fall within the size limit. If your goal is a smaller, adjustable increase, the 1.5 to 3 in ANNKUT set above is easier to tailor.
ANNKUT Furniture Risers 3 inch: Best for a lower adjustable lift
- Stackable 1.5 or 3 in height
- Polypropylene construction
- TPU rubber at base
- Full and half sides
The lower height choices suit a bed that needs a modest lift, and the full or half sides help with different leg sizes. Confirm the fit before settling on this style.
Pros
- Two height options
- TPU rubber base
- Full or half side
Cons
- Fewer height choices than the 4 in version
- Leg dimensions need checking
This ANNKUT set is the better match when you need less height than a 4 or 6 in block. Its stackable layers give 1.5 or 3 in of lift.
The rough, convex top and TPU rubber base are designed to help keep the furniture feet in place. The L-shaped edge has full and half sides, so you can orient the block around the leg that needs support.
Check the foot dimensions and place the same height under every support point. Uneven riser heights can leave the bed frame tilted and put extra pressure on some joints.
Choose these for a modest lift with two height settings. If you want a 1 in height change or a wood material, the Sopicoz set later in this list has layers that stack in 1 in steps.
Hiceeden 4 Pack Heavy Duty Bed Risers: Best for wide square furniture feet
- 6 in lift
- Fits feet 4 in or less
- Trapezoid shape
- Four rubber strips at base
The broad trapezoid base and 6 in height suit buyers seeking substantial storage clearance. The stated fit limit is 4 in, so check both leg width and bed stability.
Pros
- Wide base
- Four rubber strips at base
- L-shaped sides
Cons
- Only one stated height
- Legs must be 4 in or less
Hiceeden suits buyers who want a single 6 in lift with a broad base. The trapezoid blocks measure 6.2 x 6.2 in at the base and are intended for furniture feet 4 in or less.
Raised square patterns on top grip the feet, while four rubber strips at the bottom help protect hard floors. Its L-shaped sides also help keep a leg positioned on the riser.
A 6 in rise is substantial, so check the mattress height and whether your storage containers can use the extra clearance. Measure each foot since the fit limit is 4 in.
Pick this set if your bed legs are compact enough for the opening and you want a taller fixed rise. For a smaller adjustable rise, compare the stackable ANNKUT options above.
DEDU Oversized Bed Risers Heavy Duty Stackable: Best for stacking to 6 in
- 3 or 6 in height
- 5.7 in diameter opening
- Raised edge
- Stackable design
DEDU offers a wide opening with a 3 in base height and a 6 in option when stacked. Its broad footprint calls for enough clear floor space around each bed leg.
Pros
- Two height options
- Wide opening
- Raised edge around the post
Cons
- Large footprint
- Stacking adds height and another joint
DEDU offers a 3 or 6 in setup with a wide 5.7 in diameter opening. The 3 in blocks can be stacked for the taller option.
Its raised edge is designed to hold a post in place, and the bottom has a honeycomb structure. The 7.4 x 7.4 in bottom dimension means you'll need enough floor space around each bed foot.
Stacking helps when you need the choice of two heights, but it also means checking that the two pieces sit flat together. Keep all four corners at the same height and make sure each leg rests inside the opening.
Choose DEDU if the round opening fits your bed feet and a broad footprint works in the room. For setup advice, read how to use bed risers before lifting the frame.
Noamus 6 Pack Round Bed Risers: Best for six-point support
- Six round blocks
- 3 in stated lift
- Fits legs up to 3 in wide
- Foam pads on top
Six blocks can suit a bed with six support points, provided all feet fit inside the 3 in opening. The foam pads are intended to reduce slipping and friction noise.
Pros
- Six blocks in the set
- Foam pads on top
- Round shape
Cons
- Legs must be no thicker than 3 in
- Not suitable for recliners
Noamus includes six round risers, which may suit a bed with six support points. Each block has a 3 in inner opening and provides a stated 3 in lift.
Foam pads on top are intended to reduce slipping and friction noise. The set is not suitable for recliners, and its instructions caution against moving furniture while the blocks are in use.
Check that every foot is no thicker than 3 in and that the bed frame has six suitable contact points. Don't leave any support leg sitting outside a block or partially on its rim.
Choose this set if the bed has six feet that fit the round opening. If your frame has wheels, review our guide to bed risers for wheels and confirm the wheel cannot roll free.
Sopicoz Wood Bed Risers: Best for a wood finish
- Rubber wood blocks
- 1 in layers stack to 4 in
- Rubber pads at both ends
- Four pieces
Wood layers let you add height in 1 in steps, up to 4 in. Check the block dimensions and your furniture feet for a secure fit before using them on a bed.
Pros
- Natural wood material
- Adjusts in 1 in steps
- Rubber pads at both ends
Cons
- Stacked layers need careful alignment
- Confirm dimensions for your bed legs
Sopicoz is the wood option, with four rubber wood pieces that stack in 1 in layers up to 4 in. You can add or remove layers to reach the height you want.
Rubber pads are provided for both ends of the risers to help hold furniture securely. The maker advises checking the block sizes against the furniture before use, so compare the base dimensions and your bed feet carefully.
Wood can suit a room where visible blocks matter, but stacked pieces need to sit squarely and evenly. Keep the same number of layers under every support point.
Choose these if you prefer wood and want height steps smaller than 1.5 in. For more options in that material, see our guide to best wooden bed risers.
MXMZHXU Bed Risers 2 inch: Best for a simple 4 in lift
- L-shaped construction
- 4 in stated height
- 6.1 x 6.1 in base
- ABS material
The L-shaped sides and square footprint provide a straightforward 4 in lift. Confirm the bed feet fit the 6.1 in blocks and that the height leaves enough room to sit and get in safely.
Pros
- Simple 4 in height
- L-shaped sides
- Square footprint
Cons
- No other height options are specified
- Leg fit dimensions need confirmation
MXMZHXU provides a simple 4 in lift with L-shaped sides and a 6.1 x 6.1 in footprint. The blocks are made from ABS.
This product is a fit to consider when you want a fixed height and a square base. The available fit details do not give a maximum leg size, so compare the block with your bed feet before use.
A 4 in lift can create useful storage clearance, but it also raises the mattress surface. Check how the new height feels for sitting, getting in and getting out before leaving the bed on the blocks.
Choose MXMZHXU if a fixed 4 in increase suits your needs and the shape fits your frame. For another fixed-height comparison, see best platform bed risers.
How should you compare bed riser blocks?
Compare bed riser blocks by the fit of the opening, the lift height and the way each block contacts the floor. A high capacity figure cannot make up for a bed foot that sits partly outside the support.
Start with the exact shape and width of every foot. Round legs, square posts, angled feet and casters need different openings, and bed frames may have center supports that are easy to overlook.
Next, decide how much clearance you need. Measure the tallest storage bin or cleaning tool you plan to fit underneath, then add a little room so it doesn't scrape the frame.
Finally, consider floor contact and setup. Rubber strips, pads or a non-slip base are features to compare, but the bed still needs a level floor and full contact at each support point.
What height do you need for storage clearance?
The right height is the smallest lift that clears your storage or cleaning needs. Measure from the floor to the lowest obstruction under the frame, then compare that space with the height of your bin or vacuum.
A 1.5 to 3 in lift may be enough for slim storage containers. Taller blocks can create more room, but a high bed may be harder to get into and can change the feel of sitting on the edge.
Check the mattress height as well as the frame. A thick mattress on a 6 in riser may put the top higher than expected, especially for children or anyone who finds a tall step uncomfortable.
Are stackable bed riser blocks a good choice?
Stackable blocks are useful when you want more than one lift height from the same set. ANNKUT's layers offer several settings, while Sopicoz adds height in 1 in increments.
Each extra layer adds another surface that must sit flat and aligned. Set the pieces on a level floor, keep the same number of layers under every foot and lower the bed gently.
Don't stack blocks that aren't designed to connect. If the bed moves or a riser shifts during setup, stop and correct the fit before using it.
Which bed riser blocks work with different bed frames?
The best block depends on the bed's support points, not just its size label. A king bed may have center legs, and a platform frame may use a continuous base that doesn't fit individual cups.
Measure each foot and check how many supports touch the floor. If you have a king bed, use our guide to best bed risers for king size bed to review frame-specific fit questions.
For a queen frame, compare the number and placement of its feet with the guidance in best bed risers for queen size bed. Metal frames also vary in leg shape, so check best bed risers for metal bed frame before choosing a block.
A bed without separate legs may need a different support style. See bed risers for beds without legs before trying to place blocks under a broad base.
How can you keep raised bed risers stable?
A stable setup starts with matching blocks to the feet and placing them on a level, firm surface. Lower each bed leg fully into its support and check that the frame sits level before adding bedding or storage.
Don't drag a raised bed across the floor. Move the frame off the blocks before repositioning it, then inspect the blocks for cracks or shifted layers before setting it back down.
If the blocks will be visible, a bed skirt can cover them, but keep the fabric clear of moving parts and storage bins. Our guide on how to hide bed risers covers ways to make them less noticeable.
Which bed riser blocks should you choose?
Choose ANNKUT's 4 in stackable blocks if you want several height settings and your legs fit the rectangular opening. Pick MYMULIKE for oversized feet, Hiceeden for a fixed 6 in lift, or Sopicoz for wood layers in 1 in steps.
If you need a tall bed for a dorm, see our best bed risers for dorm and best bed risers for dorm twin xl guides. For outlets, compare bed risers with outlets, and review best bed risers adjustable for more height options.
Bed riser blocks can change bed height, but they don't treat a health condition. If you're considering a raised bed for reflux, read best bed risers for acid reflux and speak with a health professional about ongoing symptoms.
Our score weighs specs, features and buyer feedback against what you're shopping for.
See also: how to use bed risers, best platform bed risers, and bed risers with outlets.
Our top 3 picks at a glance
-
1
-
2
-
3
Frequently asked questions
How do I choose the right bed riser block size?
Measure each bed leg at its widest point and compare it with the block's opening or stated fit range. Also check whether the leg is centered, angled or irregular, since a block that fits one dimension may not support the foot evenly.
Measure the area under the bed too, so the added clearance works with your storage bins.
Are stackable bed riser blocks stable?
Stackable blocks can offer more than one height, but every layer adds a joint that must sit flat and line up correctly. Use only the intended pieces, set them on a level floor and check that each bed leg rests fully in its support.
Don't move the bed while it is raised.
How much height should bed riser blocks add?
Choose the smallest lift that gives you the clearance you need for storage or cleaning. A 1 to 3 in rise may be enough for low bins, while taller blocks create more space but also change how high you sit and step into bed.
Measure before you buy.
Can bed riser blocks go on carpet?
A riser may sit differently on carpet than on a hard, level floor. Check that the block does not rock or sink unevenly, and make sure all bed feet remain secure after lowering the frame onto the blocks.
Avoid using risers on soft or uneven flooring if you cannot get stable contact.
Can I use bed riser blocks on a bed with wheels?
Only use a block that fits and secures the caster, and make sure the wheels cannot roll out of position. Some products are described for caster wheel furniture, but fit depends on the caster shape and size.
For more guidance, see our bed risers for wheels guide.
